19 YEARS UVC SMD LED FACTORY 

Contact Information

 Offices: No.369,Baotian 1st Road, Tiegang, Xixiang, Bao'an, Shenzhen, China.

Telephone: +86-0755-29985915
Mobile: +86-189 2465 4005

 Email: info@tzuvcled.com

Contact us

loading

Share to:

5050 SMD RGB LED Chip Full Color

Multiple colors available for the 5050 SMD LED Chip
  • White; Warm white; Cold  white; Blue; RGB, etc.
Package quantity:1000PCS/Roll.
  • MOQ: 1 Roll
Sales mode: wholesale, ODM/OEM
Availability:
Quantity:
  • S6-5050RGBTA

  • Tuozhan

  • 5.4*5.0mm

  • 1.6 mm

Specifications:



  Luminous intensity

 Dominant avelength 

    Forward voltage     

   Power dissipation
    red  700mcd   red 623nm   red        1.8-2.4v   red      60 mW
   green 1200mcd   green  523nm   green    2.8-3.4v   green  90 mW
   blue      400mcd   blue 470nm   blue     

2.8-3.4v

   blue    90 mW

Max pulse current:          100mA

DC forward current:        30mA

Storage temperature/

Operating temperature: -40-85℃

Package quantity:1000PCS/Roll.


rohs  pb


Caution:


  • LED is a current-operated device. The slight shift of voltage will cause big change of current,  which will damage LEDs. Customer should use resistors in series for the Over-Current-Proof.

  • In order to ensure consistent light-color on multiple LEDs connected in parallel, individual  resistor separately is suggested, as Circuit A below shown. If the light-color of each LED  shown as Circuit B might be difference due to the different I-V characteristics of each LED.

  • Too high ambient temperature will affect the brightness of LED and its properties, please be  away from the heat so as to keep performance better.



主图2           主图2            图2


Storage:


  • The recommended storage before unpacking: Temperature :5℃~30℃; Humidity :below 60%  RH. Dehumidification should be done before use when it stored for more than 2 months.  Conditions 60℃/12 hours.

  • The suggested storage requirement should be temperature in 5~30°C,humidity below 30%  after open the package.

  • LED is a component that is sensitive to humidity,which requires to be stored in sealed  container with desiccant or nitrogen moisture-proof cabinet to avoid moisture absorption after  unpacking.

  • The moisture-proof level of LED is MSL3. Component should be used in 168hrs(7 days) after  unpacking and be welded as soon as possible.

  • Component should be dehumidified when it is exposed to the air for more than168hrs(7days)  or desiccant expired.


Electrostatic Protection:


  • Due to LED(especially the blue, yellow green, purple, white, pink LED in InGaN structure) is  sensitive to electrostatic that would damage to its structure,which may perform abnormal  after being attacked by electrostatic or overload current,such as excessive leakage current,  low VF or unable illumination, please mind as below.

  1. Anti-static wristband or anti-static gloves should be worn to touch LED.

  2. rounding protection should be done for all machinery and equipment tools, work tables,  material racks, etc..(within 10Ω of grounding impedance).

  3. Anti-static bag, anti-static box and anti-static turnover box should be used for storage or  transportation. Never used plastic.

  4. It is recommended to use ion fan to suppress electrostatic generation during operation.

  5. The Voltage of static field is less than 100V in 1 foot radius from LED component.


Clean:


  • Recommend using opropanol and other alcohol solvent rather than corrosive solution to clean  LED.


Welding:


  • Reflow welding conditions refer to the first page temperature curve.

  • Reflux welding shall be less twice.

  • Manual welding is only recommended for repairing and reworking; Finish the welding in 3  Seconds,300℃ maximum welding temperture.The maximum power of hot iron should be  less 30w.

  • It is strictly forbidden to touch colloid at high temperature during the process of welding.

  • Do not force to the colloid and bend PCB to avoid components being hit after welding.



Previous: 
Next: 

Related Products

Contact Information

More >>

 Office Adress: No.369,Baotian 1st Road, Tiegang, Xixiang, Bao'an, Shenzhen, China.

 Mobile: +86-18598102007

 Email: info@tzuvcled.com

Contact us

Quick Links

Specialized In Product

Contact Information

Contact:Info

Telephone: +86-18924654005
Mobile(Whatsapp): +86-18924654005

Send Email: info@tzuvcled.com

 Address: No.369,Baotian 1st Road, Tiegang, Xixiang, Bao'an, Shenzhen, China.
Follow Us
Copyright © 2020 Shenzhen Tuozhan Opto Electronics Co., Ltd. All Rights Reserved   Technology by leadong